Prepare your Wefts
Apply the included Blendé tape to each weft before installation. Lay the wefts flat and cut the tape to size. The 3 widest wefts are for the back. Start at the bottom of your head using the shortest first.
Create a Section
Partyour hair horizontally at the lower back. You'll work in layers from the bottom up. Starting with the shortest back weft first. Remove the tape and stick 1cm below the parted section.
Press and Blend
Press firmly making sure the weft is on securely, then allow your remaining hair to fall over the top of the section.
Repeat above two times. (In some cases with girls with very fine hair, 2 wefts at the back will be enough)
Repeat on the sides
There are 4 side wefts. (2 for each side) Apply the widest one lower and the shortest one above. Leave up to 72 hours before washing to allow the tape to set.
